Skip to content
Fifty years of turning tired concrete into something to be proud of. (951) 232-8229
Epoxy Floor Coatings, Corona, CA

Epoxy Floor Coatings in Corona, CA

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. Installed by our own crew across Corona.

Epoxy Floor Coatings installed in Corona, CA by David Paul Foster Co.
Why David Paul Foster Co. in Corona

Epoxy Floor Coatings done right, the first time, in Corona.

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. We work Corona from the Circle City streets out to the hillside tracts above Foothill Parkway, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.

We apply epoxy floor coatings across Corona and the surrounding area, including Jurupa Valley, Chino, Riverside, Chino Hills.

What's included

  • Epoxy and flake systems over properly prepared concrete
  • Diamond grinding first — never a wash-and-roll job
  • Single garage bays through to full commercial floors
  • Flake blends, solid colors and clear topcoats to suit the space
  • Old failed epoxy stripped by our own crews before anything new goes down
  • Five years on material, one year on labor
Epoxy Floor Coatings in Corona

Built for Corona homes.

Corona spreads from the old Grand Boulevard circle at its center out to newer hillside developments on the south side. The hill tracts bring sloped driveways and terraced patios; the flat older grid brings settled slabs that have taken decades of sun. Both come to us for the same reason — the surface has aged, not the concrete.

Corona also sits at the mouth of the Santa Ana Canyon, which funnels wind through the city. Exposed patios and pool decks here take more abrasion than sheltered ones, and finish selection reflects that.

The hillside developments on the south side of Corona bring work that flat-ground cities do not. Sloped driveways need a finish with grip in it, terraced patios and steps need color that carries consistently across several levels, and drainage has usually been designed for and occasionally against.

Recent work

Epoxy Floor Coatings jobs near Corona

  • Bronze flake epoxy floor curving down a commercial hallway past a blue column
  • Long bronze flake epoxy corridor in a commercial building
  • Gray and white metallic epoxy floor running down an office corridor past frosted glass
  • Gray flake epoxy floor with a timber pallet resting at the edge
  • Close view of gray and black flake broadcast into a clear epoxy topcoat
  • Marbled gray metallic epoxy floor in an office lounge with a blue armchair
  • Gray flake epoxy floor with a stainless trench drain and coved wall base
  • Gray flake epoxy floor beside a stacked timber pallet
  • Office chairs standing on a swirled gray and white metallic epoxy floor

Colors for epoxy floor coatings in Corona

30 colors to choose from, and we bring the boards to you in Corona.

See all 30 colors →
  • Flake sample boards fanned open showing tan, black, blue and red fleck blends
  • Color card showing fifteen solid coating colors from white and grays through tans, reds, blue, green and safety yellow
  • Rich Blue
  • Leaf Green
  • Safety Yellow
  • Brick House
  • Cape Cod
  • Rocky Mountain
  • Charcoal
  • Blue Fog
  • +22 more →
Corona FAQs

Epoxy Floor Coatings in Corona, questions

Does the canyon wind affect what holds up here?

It does at the exposed end of Corona. Wind-driven grit abrades a finish over time, so on the more exposed properties we lean toward harder-wearing systems rather than the softest decorative option.

Is epoxy the right choice for a floor in full sun?

Not always, and this is worth saying plainly. Standard epoxy ambers and chalks under direct UV. For exterior slabs and anything with sun on it all day we will usually steer you to a different system — a stain, a textured coating or a UV-stable topcoat. Fifty years in inland California has made that a fairly quick conversation.

Why does epoxy peel, and how do you stop it?

Epoxy peels for one reason nearly every time: it was put over concrete that was not opened up first. If the slab is sealed, dusty, oily or still holding moisture, the coating has nothing to grip and it lets go in sheets a year or two later. We grind every floor mechanically before a drop of product goes down. That step is most of the cost and all of the reason it lasts.

Ready to start your Corona project?

Free on-site estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate