Skip to content
Fifty years of turning tired concrete into something to be proud of. (951) 232-8229
Epoxy Floor Coatings, Jurupa Valley, CA

Epoxy Floor Coatings in Jurupa Valley, CA

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. Installed by our own crew across Jurupa Valley.

Epoxy Floor Coatings installed in Jurupa Valley, CA by David Paul Foster Co.
Why David Paul Foster Co. in Jurupa Valley

Epoxy Floor Coatings done right, the first time, in Jurupa Valley.

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. We work Jurupa Valley from the Mira Loma industrial edge across to the rural parcels around Glen Avon, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.

We apply epoxy floor coatings across Jurupa Valley and the surrounding area, including Riverside, Fontana, Corona, Rialto.

What's included

  • Epoxy and flake systems over properly prepared concrete
  • Diamond grinding first — never a wash-and-roll job
  • Single garage bays through to full commercial floors
  • Flake blends, solid colors and clear topcoats to suit the space
  • Old failed epoxy stripped by our own crews before anything new goes down
  • Five years on material, one year on labor
Epoxy Floor Coatings in Jurupa Valley

Built for Jurupa Valley homes.

Jurupa Valley is one of the most mixed cities we serve. It runs from serious industrial and warehouse ground on the Mira Loma side through to rural parcels and horse property around Glen Avon and Rubidoux. We do genuinely different work at the two ends of it.

On the rural side it is barn floors, wash racks, long driveways and older ranch concrete. Different job, same principle — find out what is on the slab and whether it is sound before deciding what goes over it.

The industrial side brings warehouse and distribution floors, and a lot of them. This is heavy logistics country, and those floors take forklift traffic, dropped stock and constant abrasion. They also frequently carry old coatings and mastic from previous tenants that have to come off before anything new goes down.

Recent work

Epoxy Floor Coatings jobs near Jurupa Valley

  • Bronze flake epoxy floor curving down a commercial hallway past a blue column
  • Long bronze flake epoxy corridor in a commercial building
  • Gray and white metallic epoxy floor running down an office corridor past frosted glass
  • Gray flake epoxy floor with a timber pallet resting at the edge
  • Close view of gray and black flake broadcast into a clear epoxy topcoat
  • Marbled gray metallic epoxy floor in an office lounge with a blue armchair
  • Gray flake epoxy floor with a stainless trench drain and coved wall base
  • Office chairs standing on a swirled gray and white metallic epoxy floor
  • Close view of an electrical company logo inlaid into a gray flake epoxy floor

Colors for epoxy floor coatings in Jurupa Valley

Epoxy flake, solid colors — 30 colors, shown on actual concrete rather than on a screen.

See all 30 colors →
  • Three columns of metallic and marbled epoxy color chips in purples, greens, blues, teals and oranges
  • Fifteen hand-labelled flake blend sample squares laid out in a grid on a concrete slab
  • Sand Beige
  • Brown Stone
  • Tile Red
  • Fast Red
  • Rich Blue
  • Leaf Green
  • Safety Yellow
  • Brick House
  • +22 more →
Jurupa Valley FAQs

Epoxy Floor Coatings in Jurupa Valley, questions

Do you work on the rural parcels and horse property out here?

Yes. Barn aisles, wash racks, tack rooms and long ranch driveways around Glen Avon and Rubidoux are all normal work for us.

How long does an epoxy floor take?

A residential garage is typically a couple of days including the grind and the cure between coats. Commercial floors depend on square footage and how much old material has to come off first. Dave gives you real dates on the estimate, and our own crew works them — nothing is handed to a subcontractor whose schedule we do not control.

Is epoxy the right choice for a floor in full sun?

Not always, and this is worth saying plainly. Standard epoxy ambers and chalks under direct UV. For exterior slabs and anything with sun on it all day we will usually steer you to a different system — a stain, a textured coating or a UV-stable topcoat. Fifty years in inland California has made that a fairly quick conversation.

Ready to start your Jurupa Valley project?

Free on-site estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate