Skip to content
Fifty years of turning tired concrete into something to be proud of. (951) 232-8229
Epoxy Floor Coatings, Fontana, CA

Epoxy Floor Coatings in Fontana, CA

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. Installed by our own crew across Fontana.

Epoxy Floor Coatings installed in Fontana, CA by David Paul Foster Co.
Why David Paul Foster Co. in Fontana

Epoxy Floor Coatings done right, the first time, in Fontana.

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. We work Fontana from the older streets near the Sierra Avenue corridor out to the newer north side tracts, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.

We apply epoxy floor coatings across Fontana and the surrounding area, including Rialto, Jurupa Valley, Rancho Cucamonga, Riverside.

What's included

  • Epoxy and flake systems over properly prepared concrete
  • Diamond grinding first — never a wash-and-roll job
  • Single garage bays through to full commercial floors
  • Flake blends, solid colors and clear topcoats to suit the space
  • Old failed epoxy stripped by our own crews before anything new goes down
  • Five years on material, one year on labor
Epoxy Floor Coatings in Fontana

Built for Fontana homes.

Fontana runs from long-settled neighborhoods with genuine industrial heritage up to newer developments on the north side. It is also one of the biggest warehouse and distribution centers in Southern California, which means a large share of our Fontana work is on floors measured in acres rather than square feet.

On the residential side Fontana is hot and largely unshaded, particularly on the newer north side tracts, so exterior work follows the same UV logic as the rest of the inland valley: stains and textured coatings outside, epoxy in the garage.

Warehouse and distribution floors dominate the commercial side here. Those slabs take constant forklift traffic, and the failures are predictable — abrasion down the main aisles, impact damage at the dock and racking positions, and old coatings from previous tenants that never bonded properly to begin with.

Recent work

Epoxy Floor Coatings jobs near Fontana

  • Bronze flake epoxy floor curving down a commercial hallway past a blue column
  • Long bronze flake epoxy corridor in a commercial building
  • Gray and white metallic epoxy floor running down an office corridor past frosted glass
  • Gray flake epoxy floor with a timber pallet resting at the edge
  • Close view of gray and black flake broadcast into a clear epoxy topcoat
  • Marbled gray metallic epoxy floor in an office lounge with a blue armchair
  • Gray flake epoxy floor with a stainless trench drain and coved wall base
  • Gray flake epoxy floor beside a stacked timber pallet
  • Office chairs standing on a swirled gray and white metallic epoxy floor

Colors for epoxy floor coatings in Fontana

Every color below is photographed from a real sample board — the same ones we carry to Fontana jobs.

See all 30 colors →
  • Three columns of metallic and marbled epoxy color chips in purples, greens, blues, teals and oranges
  • Fifteen hand-labelled flake blend sample squares laid out in a grid on a concrete slab
  • Platinum
  • White
  • Light Gray
  • Medium Gray
  • Dark Gray
  • Charcoal
  • Black
  • Light Tan
  • +22 more →
Fontana FAQs

Epoxy Floor Coatings in Fontana, questions

How do you handle a distribution center that runs around the clock?

By phasing and working the hours you are not. Sectioning a floor and taking it in an agreed order — nights, weekends, planned shutdown windows — is standard for us. Give us the real operating constraints and we will scope to them.

Why does epoxy peel, and how do you stop it?

Epoxy peels for one reason nearly every time: it was put over concrete that was not opened up first. If the slab is sealed, dusty, oily or still holding moisture, the coating has nothing to grip and it lets go in sheets a year or two later. We grind every floor mechanically before a drop of product goes down. That step is most of the cost and all of the reason it lasts.

Can you go over the epoxy that is already on my floor?

We would rather not, and usually we will not. Coating over a failing coating buys you the same failure with a new color on it. Removal is a service in its own right for us — we do it for other contractors as well as on our own jobs — so taking the old system off is straightforward work rather than a reason to walk away.

Ready to start your Fontana project?

Free on-site estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate