Skip to content
Fifty years of turning tired concrete into something to be proud of. (951) 232-8229
Epoxy Floor Coatings, Murrieta, CA

Epoxy Floor Coatings in Murrieta, CA

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. Installed by our own crew across Murrieta.

Epoxy Floor Coatings installed in Murrieta, CA by David Paul Foster Co.
Why David Paul Foster Co. in Murrieta

Epoxy Floor Coatings done right, the first time, in Murrieta.

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. We work Murrieta from the historic streets downtown out to the newer tracts above Clinton Keith, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.

We apply epoxy floor coatings across Murrieta and the surrounding area, including Wildomar, Temecula, Menifee, Hemet.

What's included

  • Epoxy and flake systems over properly prepared concrete
  • Diamond grinding first — never a wash-and-roll job
  • Single garage bays through to full commercial floors
  • Flake blends, solid colors and clear topcoats to suit the space
  • Old failed epoxy stripped by our own crews before anything new goes down
  • Five years on material, one year on labor
Epoxy Floor Coatings in Murrieta

Built for Murrieta homes.

Murrieta is five minutes up the road from our yard and one of the busiest cities on our list. It grew quickly through the 1990s and 2000s, which means an enormous amount of its concrete went down inside a fairly narrow window — and it is all reaching the same age at roughly the same time.

HOA rules matter here more than in most of the cities we serve. A lot of Murrieta streets have color and finish guidelines, and we would far rather read them before quoting than have you approve something the association later turns down. Bring them to the estimate.

Because so much of Murrieta was built in the same boom, the same jobs arrive in waves. Whole streets in California Oaks and Copper Canyon reach the point where the original driveway and pool deck finishes are chalking and thinning at once.

Recent work

Epoxy Floor Coatings jobs near Murrieta

  • Bronze flake epoxy floor curving down a commercial hallway past a blue column
  • Long bronze flake epoxy corridor in a commercial building
  • Gray and white metallic epoxy floor running down an office corridor past frosted glass
  • Gray flake epoxy floor with a timber pallet resting at the edge
  • Close view of gray and black flake broadcast into a clear epoxy topcoat
  • Marbled gray metallic epoxy floor in an office lounge with a blue armchair
  • Gray flake epoxy floor with a stainless trench drain and coved wall base
  • Gray flake epoxy floor beside a stacked timber pallet
  • Office chairs standing on a swirled gray and white metallic epoxy floor

Colors for epoxy floor coatings in Murrieta

30 colors to choose from, and we bring the boards to you in Murrieta.

See all 30 colors →
  • Color card showing fifteen solid coating colors from white and grays through tans, reds, blue, green and safety yellow
  • A stack of round solid-color coating samples in blue, red, yellow, tan, white and gray
  • Platinum
  • White
  • Light Gray
  • Medium Gray
  • Dark Gray
  • Charcoal
  • Black
  • Light Tan
  • +22 more →
Murrieta FAQs

Epoxy Floor Coatings in Murrieta, questions

How far into Murrieta do you come?

All of it. We are in Wildomar, so Murrieta is the next city over — from Murrieta Hot Springs across to California Oaks and up past Clinton Keith. No part of it counts as a long trip for us.

How long does an epoxy floor take?

A residential garage is typically a couple of days including the grind and the cure between coats. Commercial floors depend on square footage and how much old material has to come off first. Dave gives you real dates on the estimate, and our own crew works them — nothing is handed to a subcontractor whose schedule we do not control.

Is epoxy the right choice for a floor in full sun?

Not always, and this is worth saying plainly. Standard epoxy ambers and chalks under direct UV. For exterior slabs and anything with sun on it all day we will usually steer you to a different system — a stain, a textured coating or a UV-stable topcoat. Fifty years in inland California has made that a fairly quick conversation.

Ready to start your Murrieta project?

Free on-site estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate