Skip to content
Fifty years of turning tired concrete into something to be proud of. (951) 232-8229
Epoxy Floor Coatings, Moreno Valley, CA

Epoxy Floor Coatings in Moreno Valley, CA

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. Installed by our own crew across Moreno Valley.

Epoxy Floor Coatings installed in Moreno Valley, CA by David Paul Foster Co.
Why David Paul Foster Co. in Moreno Valley

Epoxy Floor Coatings done right, the first time, in Moreno Valley.

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. We work Moreno Valley from the tracts below the Box Springs Mountains out toward the eastern edge of the valley, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.

We apply epoxy floor coatings across Moreno Valley and the surrounding area, including Redlands, Riverside, San Bernardino, Jurupa Valley.

What's included

  • Epoxy and flake systems over properly prepared concrete
  • Diamond grinding first — never a wash-and-roll job
  • Single garage bays through to full commercial floors
  • Flake blends, solid colors and clear topcoats to suit the space
  • Old failed epoxy stripped by our own crews before anything new goes down
  • Five years on material, one year on labor
Epoxy Floor Coatings in Moreno Valley

Built for Moreno Valley homes.

Moreno Valley grew fast and grew flat, and it sits in one of the hotter, more exposed pockets of inland Riverside County. Most of its housing went up from the 1980s onward, so the concrete is middle-aged rather than old — sound underneath, tired on the surface, and baked by a long line of hard summers.

Inside the garage it is a different matter entirely, and a ground and properly bonded epoxy or flake floor is exactly right. The distinction between interior and exterior specification matters more in Moreno Valley than in most cities on our list.

Sun exposure is the story in Moreno Valley. The tracts are open, the mature shade trees that older cities have are largely absent, and a west-facing driveway or an unshaded pool deck takes full sun for the length of a very long summer.

Recent work

Epoxy Floor Coatings jobs near Moreno Valley

  • Long bronze flake epoxy corridor in a commercial building
  • Gray and white metallic epoxy floor running down an office corridor past frosted glass
  • Gray flake epoxy floor with a timber pallet resting at the edge
  • Close view of gray and black flake broadcast into a clear epoxy topcoat
  • Marbled gray metallic epoxy floor in an office lounge with a blue armchair
  • Gray flake epoxy floor with a stainless trench drain and coved wall base
  • Gray flake epoxy floor beside a stacked timber pallet
  • Office chairs standing on a swirled gray and white metallic epoxy floor
  • Close view of an electrical company logo inlaid into a gray flake epoxy floor

Colors for epoxy floor coatings in Moreno Valley

Color is the decision most people find hardest, so we bring the boards to Moreno Valley and make it easy.

See all 30 colors →
  • Coating color chips from a fan deck spread across a concrete surface
  • Three columns of metallic and marbled epoxy color chips in purples, greens, blues, teals and oranges
  • Classic Beige
  • Chestnut
  • Desert Clay
  • Titanium
  • Platinum
  • White
  • Light Gray
  • Medium Gray
  • +22 more →
Moreno Valley FAQs

Epoxy Floor Coatings in Moreno Valley, questions

Is the concrete in the 1980s tracts still worth restoring?

Nearly always. Concrete of that age around Moreno Valley is generally sound; it is the surface that has gone. Resurfacing keeps the slab, the footings and the drainage that already work and skips the demolition entirely.

Is epoxy the right choice for a floor in full sun?

Not always, and this is worth saying plainly. Standard epoxy ambers and chalks under direct UV. For exterior slabs and anything with sun on it all day we will usually steer you to a different system — a stain, a textured coating or a UV-stable topcoat. Fifty years in inland California has made that a fairly quick conversation.

Why does epoxy peel, and how do you stop it?

Epoxy peels for one reason nearly every time: it was put over concrete that was not opened up first. If the slab is sealed, dusty, oily or still holding moisture, the coating has nothing to grip and it lets go in sheets a year or two later. We grind every floor mechanically before a drop of product goes down. That step is most of the cost and all of the reason it lasts.

Ready to start your Moreno Valley project?

Free on-site estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate