Skip to content
Fifty years of turning tired concrete into something to be proud of. (951) 232-8229
Epoxy Floor Coatings, Victorville, CA

Epoxy Floor Coatings in Victorville, CA

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. Installed by our own crew across Victorville.

Epoxy Floor Coatings installed in Victorville, CA by David Paul Foster Co.
Why David Paul Foster Co. in Victorville

Epoxy Floor Coatings done right, the first time, in Victorville.

Seamless epoxy floors for garages, offices, workshops and commercial interiors — including metallic finishes poured on site. We work Victorville from the older Old Town blocks out across the high desert tracts, with our own crew on every job — no subcontractors, no surprise charges, and one number to call from the first estimate to the finished concrete coating.

We apply epoxy floor coatings across Victorville and the surrounding area, including Apple Valley, Hesperia, San Bernardino, Rialto.

What's included

  • Epoxy and flake systems over properly prepared concrete
  • Diamond grinding first — never a wash-and-roll job
  • Single garage bays through to full commercial floors
  • Flake blends, solid colors and clear topcoats to suit the space
  • Old failed epoxy stripped by our own crews before anything new goes down
  • Five years on material, one year on labor
Epoxy Floor Coatings in Victorville

Built for Victorville homes.

Victorville sits up in the high desert on the far side of the Cajon Pass, and concrete lives a harder life there than it does down in the valley. Wide daily temperature swings, freezing winter nights, fierce summer sun and wind-blown grit all work on a slab in ways coastal and valley concrete never sees.

None of that makes good work impossible up here — it makes preparation and specification the whole game. We would rather explain that than quote a valley-floor system and let the desert find the weakness.

The high desert is the toughest environment we work in, and it deserves saying plainly. Nights genuinely drop below freezing in winter while summer days run extremely hot, so the slab expands and contracts across a range that valley concrete never experiences. Any moisture sitting in a crack through a freezing night does real damage.

Recent work

Epoxy Floor Coatings jobs near Victorville

  • Bronze flake epoxy floor curving down a commercial hallway past a blue column
  • Long bronze flake epoxy corridor in a commercial building
  • Gray and white metallic epoxy floor running down an office corridor past frosted glass
  • Gray flake epoxy floor with a timber pallet resting at the edge
  • Close view of gray and black flake broadcast into a clear epoxy topcoat
  • Marbled gray metallic epoxy floor in an office lounge with a blue armchair
  • Gray flake epoxy floor with a stainless trench drain and coved wall base
  • Gray flake epoxy floor beside a stacked timber pallet
  • Office chairs standing on a swirled gray and white metallic epoxy floor

Colors for epoxy floor coatings in Victorville

Epoxy flake, solid colors — 30 colors, shown on actual concrete rather than on a screen.

See all 30 colors →
  • Color card showing fifteen solid coating colors from white and grays through tans, reds, blue, green and safety yellow
  • A stack of round solid-color coating samples in blue, red, yellow, tan, white and gray
  • Light Gray
  • Medium Gray
  • Dark Gray
  • Charcoal
  • Black
  • Light Tan
  • Tan
  • Sand Beige
  • +22 more →
Victorville FAQs

Epoxy Floor Coatings in Victorville, questions

Do you actually come up the pass to Victorville?

We do. Free on-site estimates cover the high desert alongside the rest of our area. Because it is a longer run we will usually try to group a Victorville visit sensibly, so there may be a little more flexibility in timing.

Why does epoxy peel, and how do you stop it?

Epoxy peels for one reason nearly every time: it was put over concrete that was not opened up first. If the slab is sealed, dusty, oily or still holding moisture, the coating has nothing to grip and it lets go in sheets a year or two later. We grind every floor mechanically before a drop of product goes down. That step is most of the cost and all of the reason it lasts.

Can you go over the epoxy that is already on my floor?

We would rather not, and usually we will not. Coating over a failing coating buys you the same failure with a new color on it. Removal is a service in its own right for us — we do it for other contractors as well as on our own jobs — so taking the old system off is straightforward work rather than a reason to walk away.

Ready to start your Victorville project?

Free on-site estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate